Passing on my balls

TheDemolitionMan · #1 10-22-2008, 05:17 PM

I have a 16 pound Black Widow Solid and Roto-Grip Cell that I wouldn't mind selling to someone. I'll have the specifics on them up later on tonight. I have to get to class.

Gen_Pounder · #2 10-23-2008, 08:51 AM

Can you post pics of the layouts? Also, what is your span? I don't mind redrilling a ball but if the span is too far off, it may cause problems with the filler and the finger holes.

TheDemolitionMan · #3 10-23-2008, 11:39 PM

The total span on my Cell is 4 11/16 for my middle finger and 4 13/16 for my ring finger. On my Widow you just subtract an 1/8 of an inch from both and you got the span (4 9/16 and 4 11/16). The pin on the Widow is under the ring finger with the cg about 3 inches diagonally down to the right and there is a weighthole on the midline at my PAP. The Cell is similar accept the pin is to the side a little more (but still under the ring finger), with the cg in line with it but about 2.5 inches away. There is also a weight hole at my PAP on this ball as well. Both by the way are drilled with for Vacu-grips.

I need a little help because I have the pictures on my harddrive but I can't seem to get them posted to the site. Any special steps I need to take?

Gen_Pounder · #4 10-24-2008, 09:01 AM

My Cell is drilled similar. If I got the Widow, I would want the pin above finger grip. Re-drilling those balls that much different would dramatically change the roll because of the weight taken out of the core. Thanks anyway.